Do LED recessed lights need to be IC rated?
Even though they run cooler than other lightbulbs, LED recessed lights do still need to be IC rated. While LED bulbs produce significantly less heat than incandescent ones, they still do produce heat. … Just like any other sort of recessed lighting bulb, non-IC rated LED recessed lights can lead to fires.
What is an IC rated recessed light?
The IC stands for Insulation Contact, which means just what it sounds like. IC rated fixtures are designed to be installed in areas where they will be in direct contact with insulation. This is important as non-IC rated recessed lighting in contact with insulation creates a fire hazard.
How do you tell if recessed lighting is IC rated?
Look into the inner bulb chamber of the fixture to find the Underwriters Laboratory rating sticker, which is typically on the metal housing near the opening. This sticker will define the fixture’s rating (IC or NON-IC) and the approved maximum bulb wattage.
What is the difference between IC and non-IC recessed lights?
So what is the difference? Non-IC rated fixtures require at least 3 inches of space between the metal of the can and the ceiling insulation. Non-IC rated downlights are often used in remodels and ceilings without insulation, such as unfinished attics, unless you’re feeling ambitious and want to rip out your ceiling.
What is IC-4 rating?
The IC-4 Rating means that Redilight recessed light fittings can be safely installed without minimum clearances for normally flammable building element(s) contained in combustible areas, including ceiling spaces.
What does IC rating mean?
insulation contact rated
IC Rated stands for an insulation contact rated downlight. … And, it means these products are deemed suitable for use when covered in building insulation. This means the light fitting can come into close contact with insulation, which is not the case with most downlights.
Can IC recessed lights touch insulation?
A can light that has an IC rating can be safely installed in a ceiling with insulation. Usually IC rated lights have a 75- 100 wattage capacity, meaning that as long these lights don’t consume more than 100 watts, IC rated lights will lessen the risk of overheating and a potential fire.
Can IC rated lights touch wood?
An IC-rated recessed light can be covered by insulation and can be within 1/2″ of (or perhaps touch) other combustible materiasl (such as the wood material of the roof sheathing in your question).
Are Torchstar lights IC rated?
TORCHSTAR 6 Inch LED Slim Recessed Lighting with Junction Box, 18W=150W, CRI 90+, Dimmable Airtight Downlight, IC Rated, 1500lm, 5000K Daylight, ETL/Energy Star/JA8/T24, 5 Years Warranty, Pack of 4.